Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for the CAN bus. It's discreet, doesn't use keys or LEDs and is concealed within the vehicle's wiring.
It also allows the user to turn off the system temporarily by using Transport Mode in the event of renting out their vehicle. This guide will guide you through the installation of an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key hacking attacks, cloning attacks and relay attacks. The system is directly connected to the ECU of your vehicle and secured by a PIN code that you choose. It is undetectable by thieves using diagnostic scanners or other advanced methods. It is not able to be disabled with circuit cuts.
The system is simple to use, however it is essential to have a an expert installation to ensure a smooth and secure connection with your vehicle's ECU. Installers certified by Thatcham can assist with the installation and programing of your Ghost system. They can also suggest a tracking device or alarm to complete your vehicle's security package.
First, the installer needs to disconnect your battery in order to avoid the possibility of airbag deployment and short circuits. When the battery is disconnected, the installer can start working safely. Basic hand tools can be used to ensure precise connections. A multimeter is a great tool to verify electrical values. Insulation tape and cable ties are also necessary for securing connections and keeping wiring tidy. The Ghost Immobiliser user manual will provide specific instructions specific to your particular model.
During the installation process, it's crucial to select the right grounding location that is free of any paint or debris. Installers must also ensure that the immobiliser's wires, CAN H and the CAN L are connected to the appropriate ECU ports. These wires can be connected or soldered based on the model. To ensure a secure and long-lasting connection, it is recommended that you choose a high-quality plug.
Transport Mode can be activated by the client after the installation is completed. This allows valet parking or mechanics to use the vehicle, without having to know the pin code. To do this, the customer has to press the service button on the dashboard 5 times in the space of two seconds. Once this is done the system will verify with 5 indication signals.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's a smart option for those who regularly rents out their vehicles on platforms like Turo. Immobilisers can lower the cost of insurance, as it decreases the likelihood of theft.
Getting Started
You can't go far wrong using an autowatch immobiliser if you want to protect your car from thieves. The device protects your vehicle from being started even if a criminal steals or copies the key. It's possible because of its advanced technology, which prevents the engine from starting until the right PIN code is entered.
The device connects to the vehicle's bus network, CAN which allows direct communication with the ECU. It uses existing buttons on the dashboard and the steering wheel to create a unique sequence that only you can identify which makes it impossible for anyone else to start your car. This is the most secure way to protect your pride and joy. It will ensure that your car's value remains intact in the event that you decide to sell it.
Installing a ghost immobiliser can be a simple process, but it is important to follow the steps carefully to avoid electrical issues and system malfunctions. You must first find a 12V power source and a solid grounding on the chassis of your car. Then, you can begin connecting the wires to the immobiliser. Make use of high-quality connectors and soldering techniques to ensure a solid connection. Also, ensure that you protect the connections by insulating them with heat shrink tubing or insulation tape to shield them from short circuits in electrical power and other problems.
Once the wires have been connected, you are able to connect the battery and start the engine to determine if the immobiliser is working. Once you have verified that everything is functioning properly then you can put the immobiliser in a secure position inside the vehicle. Be sure to hide it well so that thieves can't tamper with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified This means it meets the highest standards of security and is a great protection against car thieves. It is resistant to key cloning and hacking and is not able to be disabled without the code. It is also simple to use and is able to be put into a service valet mode so that your vehicle isn't activated if you bring it in for service or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system that is designed to prevent vehicle theft. It communicates with your vehicle's ECU and connects directly to the CAN bus. Contrary to other aftermarket systems which require the removal of circuit components, the Ghost Immobiliser doesn't interfere with the factory settings for your vehicle.
The system is also inaccessible by thieves using diagnostic scanning tools. The system doesn't transmit or receive radio frequency signals, but instead uses CAN data to communication with your ECU. In addition, it doesn't need any modification to your car's existing key fobs.
Enter the sequence to disarm (either two or one button) and then switch on the ignition of your car to activate Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. After that, you are able to start your vehicle and drive off safely.
Once installed The Ghost Immobiliser can safeguard your vehicle from key cloning and hacking while preserving the value of your most prized possession. In Transport Mode, you can temporarily disable the Ghost Immobiliser if you need to hand your vehicle to service or valet park.
You'll require a constant power source (12V) and an earthing point to complete the installation of the Ghost immobiliser. Ensure that these are both well-insulated and safe to touch. It is also recommended to use cable ties to tie and secure the wires. This reduces the risk of being tampered with by thieves. Make sure you double-check the locations of these points to avoid committing a mistake and mark them with a piece of tape or label. It's recommended to check all connections for signs wear and tear. Connections that are loose can cause malfunctions in the system, so make certain that they are securely in place and securely insulated. Also, don't forget test the Ghost Immobiliser after the installation is completed. This will ensure that the unit is functioning correctly, and that all connections are safe and well-insulated. Be sure to fix any issues immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that integrates seamlessly with your car's ECU to prevent unauthorised motor starting. Its cutting-edge technology protects your vehicle from hacking and key cloning and other common methods employed by thieves to steal vehicles. The Ghost is a perfect complement to existing alarm and tracking systems to provide the best protection for your vehicle. The Ghost's unparalleled features, coupled with its subtle design makes it a preferred choice for car enthusiasts and security conscious drivers.
To ensure proper integration of the Ghost Immobiliser, it's important to follow every step of the installation procedure. Check the wiring diagram of the vehicle to help you locate and connect the wires. After that, you'll need determine the power source and grounding points. Once you've found them, you'll have to mark them so that they are easy to locate when installing. It is also essential to use high-quality tools and materials. Hand tools are a must to make precise connections and a multimeter can confirm electrical values and guarantee safety. visit these guys and insulation tape will keep all connections neat. A Ghost-specific user's guide is also available.
Before beginning the installation it is important to test the system by entering the PIN code and then starting the vehicle. This will ensure that the immobiliser functions as intended and stop unauthorised vehicle starts. It is recommended to complete this procedure regularly as part of your routine inspections of the vehicle to ensure the system is operating properly.
Once the installation has been completed, you are now able to start driving your vehicle with confidence. The Ghost will keep your precious possessions safe from potential thieves and ensure that no one can escape with your car without the proper PIN code. The Ghost can be used in conjunction with an approved Thatcham tracker, which detects attempts at theft or tampering. This lets you track your car in the event that it's stolen.
The Ghost can be used in a variety of vehicles and is compatible with all major manufacturers. Monty's Locksmith can help you secure your vehicle with this innovative device. Contact us today to find out more about our services and installation options. We are a TASSA Installer who is registered which guarantees that we adhere to strict guidelines and procedures when installing our products. This assures customers, insurance companies and law enforcement agencies that all installations are performed safely and in a correct manner.